ELDX-3.6 Bearing heater
for mount or dismount bearings 3.6KVA, 220V 1 phase. 16A.
The technical Specification
220V (180-240V) 50HZ/60HZ
Max width of bearing
Inner diameter of Bearing
Max Diameter of Bearing
Tallest temperature heating: 270 Degree C.
Packing with Heating Rods : 5 pieces.
Customized Temperature sensor: 1 piece
Heating rods size: 20*20*150 mm 30*30*150 mm 40*40*150 mm 50*50*150 mm 60*60*150 mm
Net Weight with heating Rods: 65 Kg.
More bigger Power size and model can be supply. 12 KVA induction heater
8KVA induction heater and etc. you can check our shop other website.
Bearing size reference.
The operating procedures
1) Connect the power (220V) and instrument lights on.
2) Instructions in accordance with the instrument temperature, pressor”Up” and “down”Set the heating to the desired temperature,Then Press”START”to Start,press”STOP”to stop.
3) Indicated by the instrument time,press “Up” or” Down” Set the heating time required,press the “START”, and start the heating. Press the “STOP” to stop.
4) According to the work piece diameter select heating yoke, the work piece is heated sleeve on the yoke (or set the pole), the yoke on the transformer two pillars end face and pressed activities of yoke. (Note: in the column end face of the to wipe butter.)
5) Sensor sucked into the work piece, press the “START”, and start the heating. Press the “STOP” to stop.
6) When the set heating temperature (time) reaches the set value, the machine automatically stops working.
7) Remove the work piece after the end of the installation.
Follow the operating instructions at all times.
- Must check before induction heater circuit, instrument ground is intact.
- The machine automatically detects the probe, in the absence of the probe or poor contact machine automatic alarm.
- Heating the work piece should try to choose a larger heating axis, in order to improve work efficiency.
- Bearing heating temperature should not exceed 120 degrees Celsius.
- Do not probe for a long time placed on the work piece in order to extend the life of the probe.
- Take the work piece must be wearing asbestos anti-hot sets to prevent burns. You must disconnect the power after using.
- The heater should not be used in areas where there is a risk for explosion.
- Risk of electrical hazard. Only qualified and adequately trained personnel
- must be allowed to operate the equipment.
- During the heating process observe a safety distance of 1 m (3.3 ft) with the Induction Heater.
- Since a magnetic field is generated by the induction heater, people wearing cardiac pacemakers or having metallic implants must observe a safety distance of at least 5 metres (16 ft) from the induction heater
- during operation. Electronic equipment, such as wristwatches, mobile phones, may also be affected.
- Use proper handling equipment when lifting heavy workpieces.
- Secure the workpiece with appropriate lifting and handling equipment while heating.
- Make sure the supply voltage is correct. Connecting the induction heater to the wrong voltage supply will void the warranty and probably damage the heater.
- Always make sure the heater is securely connected to earth.
- Do not expose electronic components to high humidity or water.
- Never introduce body parts into the bore of the heater during operation.
- Do not use the equipment in case of damage or heavy wear is detected
- on the heating coil.
- Handle the coil with care to avoid shock loads and jamming during mounting and dismounting.
Package: Wooden box.
Shipping Term: DHL, TNT, preference.
Payment Term: Paypal, Western Union, Escow T/T ok.
More question, you can contact me directly by trademanager.
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Natural gas fire burner, industrial burning machine for curing plant and oven
INFRAREO IC HEATER T-960 Silk Screen Printers
High Quality 60KW 380V Automatic Swimming Pool Thermostat SPA Heater Temperature Controller
US $1166.00 / piece
2.7KW air source heat pump water heater with 200L volume SUS304 stainless steel tank suitable for resturant kitchen
US $1480.00 / piece
1pc 220V ZMH-200N 3.6KVA silent bearing heater electromagnetic induction installation disassembly bearing heater
GENENG 360L Ultrasonic Cleaning Machine Industrial Car Parts Oil Degreasing Hardware Circuit Board Washer Heater Bath Ultrasound
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.