New ACCURL® high-tech TP and TC turret punch presses are produced as a closed type rigit Steel construction into a rigit structure, the finite analysis system was used in the design and simulation process to allow minumum deflection during operation. No deflection between the turret and tools occurs during the punching process and it increase tool life. TPP series turret punch presses has 2 models with 27 station/700 stroke and with 33 station/900 stroke which helps to finish all the work at onces even on very complicated sheet products. So ACCURL turret punch presses provides a complete solution with optimum cost.
• Siemens AC servo motors on all axis
• High precious positioning possibility with linear sledge system on all axis.
• Platform type on bridge side or Portable CNC control panel
• CNC control outputs/inputs for vacum table & filtering unit
• High vacuming capability with lower energy consaption
• High vacuming capability with lower energy consaption
• Independent cutting table system
• Multi head Plazma and multi head oxy fuel cutting possibilities.
• +/- 0,02 mm positioning accuracy.
• +/- 30m/min positioning speed.
– ‘O’ Frame design tested by Finite Element Analysis software, precisely machined and stress relieved to ensure high precision
– Hydraulic punching with indexable tool station through 360° in increments of 0.001°
– Punching, cutting and forming processes subject to optional tooling fitted -controlled by the CNC according to material
– Capable of producing not only 2D components but when fitted with special tools can create 3D forms which wouldn’t be possible when using a profiling process
– High nibbling rate of 600 hits per minute in 1mm pitch
– High capacity motors and precision guides on all axes able to reach high operational speeds
– Rigid beam with fitted with two sheet clamps capable of positioning sheets of up to 8mm thickness
– Very accurate repeatability of 0.04mm
– Clamping force adjusted by CNC from 100kg to 1000kg
– Repositioning feature
– High processing speeds and data transfer rates
Certifications Detailed Images
Name: Stress Relieved Bridge Frame Construction
Finite element analysis is on high performance computers is used in the design process. The concept consists of two fully enclosed box fabrications that are welded put under high load and stress relieved. The result is reduced vibration and deflection under full loads providing greater part precision, reduced tool wear, and noise reduction.
Programmable Work Chute
A large (15.7 x 23.6) programmable work chute allows automatic discharge of parts into a parts container. This feature is available optionally on all other models.
Programmable Sheet Clamps
The position of the sheet clamps are automatically set by standard program information. Contact sensors automatically stop the machine if these sensors detect any movement of the sheet while it is clamped.
The full 360° programmable head achieves 40 revolution per minute. A harmonic zero backlash gear driven system provides accurate positioning and control.
3,6,8 and station indexable multi-tools reduce tool changes and increase flexibility. Programmable to .02° with no upper and lower mechanical connections provides perfect alignment of the upper and lower tool. Even defects or worn tools can be offset.
Flexible Turret Concepts
-Thick turret tooling concept is used with all stations bushed. It can be equipped with up to six indexable multi-tool stations (center). Station-to-station indexing is done in three seconds or less.
-All dies are positioned below the table surface preventing marking of the sheet. Micro tags can be reduced to minimum for more precise parts.
CNC control System
Siemens 840 Dsi Series CNC Control
Accurl has chosen the very powerful Siemens 840 DsI CNC Control, which has been specially designed for punching. Some of the features are:
•Movable Control Cabinet
•Ethernet and Network Communication Connections
•UPS Electrical Component Surge Protection System
•Internal Diagnostics w/Graphic Visualization
•Online Help Messages
•Telediagnostics via Modem (optional)
•Auto Optimization of sheet speed according to Sheet Mass
•Graphic Programming @ Machine Control
•Sheet Layout & Automatic Calculation of Sheet Layout
•Removable Software Key (office or machine programming
* Technical solution.
* Online video authentication machine work.
* Cutting samples provided by DHL.
* Supplier will provide detail manual for software, hardware and trouble shooting, also supplier should give necessary guidance online if Buyer need. If it’s necessary, Buyer should send regular his technical staff to Supplier for technical training.
Packing & Delivery
|Size||4750mm(L) * 2250mm (W) * 1689 (D)|
|Packaging Details||1.Our wooden case is after fumigation treatment.Needn’t timber inspection,saving shipping time. 2.All the spare parts of the machine were covered by some soft materials,mainly using pearl wool. 3.The bottom of the wooden case has firm iron jack,convenient to Handling and transport.|
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
FitSain-775 DC24V 8000RPM motor pulley four jaw chuck D=50mm Machine Pulley Bench mini Lathe spindle
CNC 4th axis / A axis 130mm 4 jaw Chuck self-centering manual chuck four jaw for CNC Engraving Milling machine CNC Lathe Machine
High speed 1300*2500mm wood lathe machine price, dust collector woodworking machine
China top manufactuer best price high speed heavy duty cnc lathe machine for sale
DIY Mini Micro Lathe Machine Tool 6 in 1 lathe.Milling ,Drilling ,Wood Turning ,Jag Saw & Sanding Machine,Only for WOOD.
US $135.00 / piece
Mini Lathe Machine with 144W Motor TZ10002MPF Mini Metal Six Shafts Drilling And Milling Machine 12VDC/5A/60W
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.