RU free tax Date food batch number oil ink box code printing machine Q10068
Model: hand-held ink-jet printer YN-360
Print speed: 35m/min Print range: 2-17(mm)
Print depth: 0(mm) Print height: 2-17(mm)
Category: ink jet printer Print direction: bidirectional printing
Applicable parts: all can Air pressure: 0(MPa)
There are five colors of ink cartridges available (black, red, blue, green, yellow)Send black cartridge by default. If you need other colors, please contact customer service
Install cartridge notes:
1、When you install and remove the cartridge, remember to turn it off, so as not to damage the machine board and damage the cartridge;
2、When installing the cartridge, tilt 45 degrees into the slot;
3、After the machine is used, take out the ink box in time and put it in the lock. Don’t put it outside for a long time so as not to be affected by damp or dust. Once the cartridge is used, it is better to cut off the spray time to prevent the nozzle from being blocked;
4、Every time you use it, you need a clean paper towel, gently wipe the nozzle along the direction of the nozzle, and use it to maintain the ink box.
Product name: 360 hand printer
Ink color: black, red, blue, green, yellow
Machine size: 113MM*140mm*185mm
Running in capacity: 42cc
Machine weight: net weight 710g, including cartridge 810g
Ink properties: dry, oily, water-based
Screen size: 50mm*28mm
Jet print font: fully synchronous PC computer and mobile phone fonts
Save information: 256
Jet printing distance: 2mm-10mm
Section function: 5 paragraph
Jet printing height: 2mm-12.7mm
Jet printing accuracy: 300-600dpi
Jet printing speed: under 300dpi conditions, up to 60m/min
Count number: 1-8 digits
Power supply parameter: DC12,6V lithium battery
Jet printing barcode: bar code, two-dimensional code
Automatic printing: date, counting, batch number, serial number
External interface: charging interface, 232 photoelectric interface, USB
Use environment: temperature 0-40℃, humidity 10%-80%
Instructions for operation:
1、The installation and removal of the cartridge, be in the off state, so as not to damage the machine motherboard and damaged the machine after use to remove ink cartridges, ink cartridges, into the gate card, the best cut off time printing time, prevent the nozzle blocked, if the printer when drawing, can put the cartridge down a few left. Then with a paper towel and wipe the nozzle.
2、If you want to print some black font, can put the synchronization word wide numerical adjustment is small, the synchronization word width is small but more black, printing speed is not too fast, the minimum is 1 (not 0). At the same time in the “advanced” inside the resolution to 600dpi, the use of double nozzle, if at this time ghosting phenomenon can be adjusted for the compensation, can be set in the “advanced”, also can be in the state of “S”, through the keyboard “+” or “-” key combination.
3、The function keys on the right side of the software are clicked once, and then click on the top of the dotted line on the left, instead of double clicking. The top of the dotted line is the height of the spray head, and the font must not exceed the area
4、When the software transmits the information, it can view the current information at the time of transmission, and how many times an ink cartridge can be printed, so as to facilitate the calculation of the cost
5、If the data line is plugged in again, you can’t send the message until you click “Refresh”.
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
China Factory Price! battery recharge plastic Banding tool hand held electrical strapping machine,Packing Strapping Tool
PDR Tools Hooks Spring Steel Push Rods Dent Removal Car Dent Repair Car Body Repair Kit Paintless Dent Repair Tool Kit
US $198.53 / piece
LX-PACK Patent Brand Lowest Factory Price Hand Inkjet Printer Mobile ink jet coding machine Online inkjet printer for conveyor
LX-PACK Lowest factory price strapping tool hand held PP PET strapping machine plastic belt packaging strap width 12 -19mm
LY 9110 7 inch desktop 3 in 1 multi-functions Layer OCA laminator (OCA Glue,TP,LCD) with 2 flat screen mobile moulds
US $1330.00 / piece
Hot stamping machine thermal transfer equipment 40 * 60CM
US $645.00 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.