The PER5520(ESD5520) Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.
(PER5520E is designed for EFC series.)
Isochronous Operation/Steady Stability—- +/-0.25% or better
Supply—-12 or 24 VDC Battery Systems(transient&reverse voltage protected)
Power Consumption—-50 ma continuous plus acutator current
Maximum Actuator Current at 25celsius (77celsius F)—-10 Amps continuous
|Input||Supply||12 or 24 VDC Battery System (Transient and Reverse Voltage)|
|Polarity||Negative Ground (Case Isolated)|
|Power Consumption||50 ma continuous plus actuator current|
|Actuator Current Range @ 25 Deg. C – (Inductive Load)||Min.2.5 Amps; Max. 10Amps continuous|
|PID||PID parameter is different with ESD5500|
|Speed Sensor Signal||0.5-120 Volts RMS|
|Performance||Isochronous Operation/Steady State Stability||±0.25% or better|
|Speed Range/Governor||1K to 7.5K Hz continuous|
|Speed Drift with Temperature||±1 Max|
|Idle Adjust CW||60% of set speed|
|Idle Adjust CCW||Less than 1200 Hz.|
|Droop Range||1-5% regulation|
|Droop Adj. Max. (K-L Jumpered)||400 Hz., ±75Hz. Per 1.0A change|
|Droop Adj. Min. (K-L Jumpered)||15Hz., ±6Hz. Per 1.0A change|
|Speed Trim Range||±200 Hz|
|Remote Variable Speed Range||500 – 7.5 Hz. Or any part there of|
|Terminal Sensitivity J||100 Hz., ± 15Hz / Volt @ 5.0 K Impedance|
|Terminal Sensitivity L||735 Hz., ±60 Hz / Volt @ 65 K Impedance|
|Terminal Sensitivity N||148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance|
|Terminal Sensitivity P||10 VDC Supply @ 20 ma Max|
|Environmental||Ambient Operating Temperature Range||-40 to +85 Deg. C|
|Relative Humidity||Up to 95%|
|All Surface Finishes||Fungus Proof and Corrosion Resitant|
|Reliability||Vibration||1G at 20 to 100 Hz.|
|Testing||100% Functionally Tested|
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Free Shipping C2001 SPEED CONTROLLER Generator accessories speed controller governor speed control board
US $208.00 / piece
Superhard 63*370mm Diamond Core Bit 51*370mm Diameter 51 56 63 76mm Core Drii Bit Length 76x370mm Diamond Drill Bit.
US $18.75 / piece
26mm / 1.024″ inch Tip Cutting Diameter 1/2″ 13mm Reduced Shank Metal / wood Twist Drill Bit drilling hole tool for well
gasoline generator accessories section EF6600 MZ360 MZ300 speed governor spring spring 5kw
CBB61 13.5uf Capacitor gasoline generator parts
US $5.37 / piece
Speed governor 3044195 for generator 2pcs/lot
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.